Combustion control characteristics play an important role in improving fuel efficiency. Here are some ways to improve fuel efficiency by improving combustion control characteristics:

Optimize the air combustion ratio: Combustion control is to control the air combustion ratio to optimize the ratio. Methods include using an oxygen sensor to monitor the percentage of oxygen in the flue gas and adjusting the air supply based on the monitoring results to ensure that the fuel is burned under optimal conditions.

Comprehensive utilization of coal:

Coal crushing: Processing lump coal into powdered coal, increasing the contact area between coal and air, so that the coal can be fully burned. The finer the coal is ground, the smaller the powder, the larger the contact area with O2 in the air, the more complete the combustion, and the faster the reaction rate.

Gasification and liquefaction of coal: Converting organic matter in coal into flammable gas or liquid can fully contact the coal with air and promote the complete combustion of coal.

Use advanced combustion equipment and technology: Using advanced combustion equipment, combustion control systems and combustion optimization technology can improve energy utilization and environmental benefits. These technologies can precisely control the supply of fuel and oxygen content to achieve complete combustion and reduce exhaust gases and pollutants produced by incomplete combustion.

Thermal energy recovery and utilization: Utilizing the waste heat generated by combustion for waste heat recovery can improve fuel utilization efficiency. For example, by installing a waste heat recovery device, the waste heat can be used for heating, hot water production or power generation, which not only reduces energy waste but also reduces greenhouse gas emissions.

Control fuel supply: Reasonably control fuel supply to ensure full combustion of fuel. By controlling parameters such as fuel injection speed, angle and position, the best results of the combustion process can be achieved.

By optimizing combustion control characteristics, such as controlling air combustion ratio, comprehensive utilization of coal, using advanced combustion equipment and technology, heat energy recovery and utilization, and controlling fuel supply, fuel efficiency can be effectively improved and energy consumption and environmental pollution can be reduced.

K006 AC 7KW 11KW 22KW EV Charging Station Electric Car Chargers